Monopitch Sliding Rooflight - NL639
OPEN |
![]() |
CLOSED |
![]() |
All Units come complete with electrical 24DC (or 240 Volt) motors, control pannel, rain sensore, day to day switch and B/S standard white powder coating.
Size options:
Many different sizes and combinations are available to meet with yuor requirements.
Please speak with our technical team for furhter information.
Ventialtion:
The base kerb can be adapted to incorperate a selection of vent options.
Insulation:
PVC foan insulation is fiited between the vertical twin skin metal upstand,
various class specifications are available to choose from.
Glazing Options:
Thermoformed rooflights - Single, Twin or Triple skin applications from our
standard range, 3mm U/V protected outer skin / 3mm thick inner skin. Comes
with a manufacturers discolouration and impact resistance guarantees. Glass
- Most applications can be incorporated.
Fixing Details:
The kerb is supplied fully assembled ready for fitment to roof structures,
the kerb should be fixed at the corners then 300mm centres. Thermoformed
Roof lights - Are supplied separately to kerb and should be bolted to the
opening frame, sealer washers, caps and roofing bolts with nuts are supplied
as standard for this purpose. Glass - Applications will be pre-glazed unless
size does not permit.
Cleaning / Maintenance:
Cleaning - Glass and Thermoformed roof lights should be washed down with a mild detergent and warm water. Do not use abrasives.
Maintenance - Annually visual check only.
Other options available:
This unit can be supplied in an ‘Adaptor kerb profile’ or direct to roof.
Points to check prior to advising us
of your requirements:
When placing an enquiry/ order please be sure to note the roof opening size
, and where possible the width of the upstand kerb.
Delivery Period: 8 to 10 weeks