Hinged Access - NL603







A simple robust design, our hinged roof access kerb is available in two profiles and comes as standard with a hasp & staple latch or other optional mechanisms. Many can be achieved with this kerb including ladder access, please contact our technical staff for more information.

Size Options:
Most sizes are available from our standard range, however, specific design requirements can be met to suit your needs.

Ventilation / Insulation:
Ventilation - Base kerb can be adapted to accomodate most vent options from the stanndard range.
Insulation - Poly Foam or PVC insulation can be fitted to base kerb, as an option , to suit your requirments.

Glazing Options:
Thermoformed rooflights - Twin or single skin applications from our standard range, 3mm UV protection outer skin / 3mm thick inner skin. Comes with manufactuer discolouration and impact resistance garuntees.
Glass - Applications can be incorporated.

Fixing Details:
The kerb is supplied fully assembled ready for fitment to roof structures, kerb should be fixed at corners then 300mm centres.

Cleaning / Maintenance:
- Thermoformed rooflights should be washed down with a mild detergent and warm water. Do not use abrasives.
Maintenance - Annually check mechanical components, and lubricate where necessary, actuating components.

Points To Check Prior To Advising Us Of Your Requirements:
When placing an enquiry / order please be sure to note the roof opening size, and where possible, the width of the upstand kerb.
Also note the desired kerb profile (as detailed above), and ensure that the opening size will allow sufficient clearance for access, see measure guide.




Back to Roof Access